I was struck by an idea this evening for a simple way to display the necklaces I’ve made for my shop rather then just having them all stuffed into a drawer. My solution? It cost me $5 and about 15 minutes.

Remember my bench rebuilding project? I had a piece of wood left over from that that was 34″ long- which was only 2″ shorter than I initially planned on, and sawing wood down to smaller pieces with a hand saw sucks, so I went with it like it was instead of cutting a larger piece down.

Then I popped over to Lowe’s, bought a package of screws (I only needed 2) to mount the board to the wall, and spent another $3.58 on a package of 40 7/8″ rounded, semi-circular screw hooks. I drilled a hole near each end for the mounting screws, and one hold down the middle every 1.5″ to screw a hook into. Remember when drilling your pilot holes to make them a size smaller in the wood then the actual screw is.

Then I screwed it into the wall and hung up all the necklaces! Easy, and fast! You could of course paint or stain the wood (I might spray it white later on) but I just put it up as is.

Yesterday I posted that I made the low-volume maxi skirt as explained on So Sew Easy. My first try at it was nothing but problems, and my fabric, a thin slippery knit, kept getting stuck in my throat plate. I did a bunch of research this morning and only found one thing to try that I had not already given a shot- changing my needle. I wanted to try adding a second layer to the skirt because the material is so thin that panty lines are highly visible- more so because the fabric is shiny.

silverfront

 

I grabbed the skirt and cut another layer for it, then attempted sewing it again with the new needle. Amazingly it worked pretty smoothly though I did have to help the fabric along a bit. I am much more pleased with the outcome with the second layer of fabric in the skirt.

silverback

 

I think this will be a great basic piece to have in my wardrobe and should be matchable with a lot of different tops.